Avaya BCM50 Hardware Installation Manual page 60

BCM50 Hardware & Installation
7. Remove the 3 screws securing the Router card to the motherboard.
LED
pipes
8. Holding the card near the back, gently lift until it detaches from the
motherboard connector.
9. Gently lift the back of the router card to disengage it from the card
connector.
10. Slide the router card back so the modular connectors clear the bezel.
11. Lift the router card over the top of the LED pipes and place it on a flat,
clean, static-free surface
12. With the back of the new router card raised enough to clear the LED
pipes, align the modular connectors on the router card with the
corresponding holes in the bezel.
13. Move the router card forward until the front edge of the card touches
the bezel.
14. Align the card connector on the router card with the connector on the
Compact Services Card.
15. Gently press down on the back of the router card to seat the router
card in the connector on the Compact Service Card.
16. Re-attach case and cables and power up the BCM.
60
.
NN40011-002 Issue 1.2 BCM50 Rls 6.0