Wg602V3 Wireless Access Point Rear Panel - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual

WG602v3 Wireless Access Point Rear Panel

Figure 1-2 illustrates the rear layout of the WG602v3Wireless Access Point.
Power
Reset/Restore
Socket
Button
Figure 1-2
• Power Socket. Power adapter and cord socket for connecting the WG602v3 to an AC outlet.
• Reset and Restore Button. Restores the WG602v3 to the factory default settings when
pushed and held for 10 seconds. When pushed once, the WG602v3 is reset to the previous
settings.
• RJ-45 Ethernet Port. Ethernet cable port for connecting the WG602v3 to an Ethernet LAN
device such as a hub, switch, or router.
• Detachable Antenna. The WG602v3 includes a detachable antenna. Be sure the antenna is
securely fastened.
1-6
Detachable
RJ-45 Ethernet
Antenna
Port
v1.0, August 2006
Introduction