2.
Error information on the screen can be manipulated by the following number keys:
1 scrolls the display to the next page.
2 scrolls the display to the previous page.
3 returns to the Diagnostic Menu.
4 erases all error log information in RAM.
5 outputs the error log information to a printer.
6 reads log information from a floppy disk.
7 writes log information to a floppy disk.
3.
In the case of "error retry OK," a capital "R" will be placed at the beginning of the
error status, but not added to the error count.
T200, T200CS
3-45