4.5
Hard Disk Drive
Removing the Hard Disk Drive
To remove the computer's hard disk drive, follow the steps below and refer to Figures 4-4
through 4-7.
1.
Turn off the power to the computer. Disconnect the AC adapter, power cord and
all external cables connected to the computer.
2.
Remove the battery pack, optional memory card, and optional PCMCIA cards as
described in sections 4.2, 4.3 and 4.4.
3.
Remove the one M2.5x6 screw from the HDD cover (Figure 4-4).
NOTE: The HDD cover is held in place by one screw and two latches. Be careful to
rotate the cover out as indicated in Figure 4-4 when removing it , and engage the
latches first, then rotate it into place when seating it.
4-10
Figure 4-4 Removing the HDD Cover
T200, T200CS