Toshiba T200 User Manual page 89

2. Good track FORMAT
This option formats a specified cylinder and track as a good track. If a good track
is formatted as a bad track, use this option to change the track to a good track.
3. Bad track FORMAT
This option formats a specified cylinder and track as a bad track. If a bad track is
detected, use this option to label it as a bad track.
4. Bad track CHECK
This option searches for bad tracks by reading data to all tracks. A list of bad
tracks is displayed when the program is complete. If an error other than a bad
track is detected, the program is terminated.
3.18.2 Operations
CAUTION: After the hard disk is formatted, set the partition. Refer to the customer's
operating system documentation for details on partitioning the disk.
Select 2 from the DIAGNOSTIC MENU and tap or press Enter to display the following
menu:
DIAGNOSTICS - HARD DISK FORMAT : VX.XX
1 - All track FORMAT
2 - Good track FORMAT
3 - Bad track FORMAT
4 - Bad track CHECK
9 - Exit to DIAGNOSTICS MENU
1. All track FORMAT
Tap or press 1 to select "All track FORMAT," and format the entire disk.
[All track FORMAT]
Drive
Cylinder :
T200, T200CS
: #1 = HDD
XXXX
#2 = Non
3-39