Installing the T200CS Lower System Board
To install the T200CS's lower system board, follow the steps below and refer to Figures 4-14 and
4-15.
1.
Place the card eject assembly into the middle frame, then connect the tablet cable to
PJ407 and carefully rotate the lower system board (Figure 4-15).
2.
Connect the display cable to PJ405 (Figure 4-14), and replace the black insulator
over the display cable.
3.
Place the lower system board on the base frame (Figure 4-14).
4.
Secure the three M2.5x4 screws on the lower system board (Figure 4-14).
5.
Install the upper system board, backup battery, RTC battery, back cover, HDD,
optional PCMCIA card, optional memory card, and battery pack as described in
sections 4.2, 4.3, 4.4, 4.5 4.6 and 4.7.
4-24
T200, T200CS