Fl Inverter Board - Toshiba T200 User Manual

4.10 FL Inverter Board

Removing the FL Inverter Board
To remove the computer's FL inverter board, follow the steps below and refer to Figure 4-16.
1. Turn off the power to the computer. Disconnect the AC adapter, power cord and
all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA cards, HDD,
back cover, upper system board, backup battery and RTC battery as described in
sections 4.2, 4.3, 4.4 ,4.5, 4.6 and 4.7.
3. Remove the tape and disconnect the FL inverter cable from CN1 and the FL cable
from CN2 (Figure 4-16).
4. Remove the three M2.5x4 screws securing the FL inverter board and lift out the FL
inverter board (Figure 4-16).
T200, T200CS
Figure 4-16 Removing the FL Inverter Board
4-25