Show Forwardingdb Agetime; Config Forwardingdb Agetime; Device Configuration Commands - NETGEAR 7200 Series User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default
Format

show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid|all] parameter
is required. In an SVL system, the [fdbid|all] parameter is not used and will be ignored if entered.
Default
Format
Forwarding DB ID
Agetime

config forwardingdb agetime

This command configures the forwarding database address aging timeout. In an IVL system, the
[fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will
be ignored if entered.
Default
Format
Seconds
Forwarding Database ID

Device Configuration Commands

This section describes device configuration commands.
Switching Commands
5
config telnet timeout <0-160>
all
show forwardingdb agetime [fdbid|all]
Fdbid (Forwarding database ID) indicates the forwarding database whose aging
timeout is to be shown. The all option is used to display the aging timeouts
associated with all forwarding databases. This field displays the forwarding
database ID in an IVL system. This field will not be displayed in an SVL
system.
displays the address aging timeout for the associated forwarding database in
IVL. In an SVL system, this will display the system's address aging timeout
value in seconds.
The default value for <10-1,000,000> is 300 seconds
config forwardingdb agetime <10-1,000,000> [fdbid/
all]
The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Fdbid (Forwarding database ID) indicates which forwarding database's aging
timeout is being configured. All is used to configure all forwarding database's
agetime. In an SVL system, the [fdbid/all] parameter is not used and will be
ignored if entered.
202-10010-01
7-23