User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Figure 8-4
shows the RJ-45 plug and RJ-45 connector.
Figure 8-4: RJ-45 Plug and RJ-45 Connector with Built-in LEDs
Table 8-1
lists the pin assignments for the 10/100 Mbps RJ-45 plug and the RJ-45 connector.
Table 8-1.
10/100 Mbps RJ-45 Plug and RJ-45 Connector Pin Assignments
PIN
NORMAL ASSIGNMENT ON
PORTS 1 TO 8
1
Input Receive Data +
2
Input Receive Data –
3
Output Transmit Data +
6
Output Transmit Data –
4, 5, 7, 8 Internal termination, not used for data transmission
Table E-2 lists the pin assignments for the 100/1000 Mbps RJ-45 plug and the RJ-45 connector.
Cabling Guidelines
UPLINK ASSIGNMENT ON
PORT 8
Output Transmit Data +
Output Transmit Data –
Input Receive Data +
Input Receive Data –
202-10010-01
A-7