Show Radius Accounting Summary; Show Radius Accounting Stats - NETGEAR 7200 Series User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

show radius accounting summary

This command displays the configured accounting mode and accounting server.
Format
Mode
IP address
Port
Secret Configured

show radius accounting stats

This command displays the statistics for the accounting server. The IP address specified must
match that of a configured accounting server.
Format
Accounting Server IP address
Round Trip Time
Accounting Requests
Accounting
Retransmissions
Accounting Responses
Malformed Accounting
Responses
Bad Authenticators
Pending Requests
Timeouts
Unknown Types
Packets Dropped
7-64
show radius accounting summary
Enabled or Disabled.
The configured IP address of the accounting server.
The port in use by the accounting server.
Yes or No.
show radius accounting stats <ipaddr>
The time interval, in hundredths of a second, between the most recent
Accounting-Response and the Accounting-Request that matched it from this
RADIUS accounting server
The number of RADIUS Accounting-Request packets sent not including
retransmissions.
The number of RADIUS Accounting-Request packets retransmitted to this
RADIUS accounting server.
The number of RADIUS packets received on the accounting port from this
server.
The number of malformed RADIUS Accounting-Response packets received
from this server. Malformed packets include packets with an invalid length. Bad
authenticators and unknown types are not included as malformed accounting
responses.
The number of RADIUS Accounting-Response packets that contained invalid
authenticators received from this accounting server.
The number of RADIUS Accounting-Request packets sent to this server that
have not yet timed out or received a response.
The number of accounting timeouts to this server.
The number of RADIUS packets of unknown type that were received from this
server on the accounting port.
The number of RADIUS packets that were received from this server on the
accounting port and dropped for some other reason.
202-10010-01
Switching Commands