Setting Up - VTech 15750 User Manual

sETTING UP

Telephone base installation
1. Insert the power adapter and the telephone line cord
into the base station, as shown below.
. Insert the telephone line cord into a telephone wall
jack. If you have DSL high speed internet service, a
DSL ilter (not included) is required.
3. Insert the other end of the power adapter into the
wall outlet.
Plug the large end
of the telephone
base power
adapter into a
power outlet.
Route the power
adapter cord
through this slot.
Note: Ensure power cord is fed through slot on base so
unit sits lush with the desk.
Plug the small end of the
telephone base power adapter
into the power adapter jack on
the back of the telephone base.
13
Plug one end of the
telephone line cord
into a telephone
jack or a DSL ilter.
If you have DSL
high-speed
Internet service,
a DSL ilter (not
included) is
required.
Route the
telephone line cord
through this slot.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.