Setting Up A Conference Call - VTech VSP601 User Manual

Setting up a conference call

You can hold a conference call between yourself and two other parties.
To set up a conference call:
1. During a call, press CONF. The call is automatically put on hold and the
conference setup screen appears.
2. Dial the second number for the other party you want to join your conference.
You can also use a number from a list, such as the Directory or Call History.
3. When the second call is established, press
and the conference screen appears.
Press to terminate both calls and end the conference.
END
To create a conference with a held call:
1. If you are on an Active call and also have a call on hold, press CONF. A list of
held calls will appear.
2. With the call you want to conference with highlighted, press
conference will begin immediately.
Setting up a Network Conference:
A Network Conference is hosted by your service provider and allows multiple
parties to join a conference. A Network Conference works in a similar way to the
regular conference described above, except you can add as many parties as
your service provider supports. Pressing the CONF. key or the
during a conference will allow you to add more parties to the ongoing conference.
â
CONF.
CONF.
â
CONF.
â
CONF.
25
. The conference begins
SELECT
soft key
Add
. The