VTech 15750 User Manual page 133

• Move the cordless handset closer to the telephone
base. You may have moved out of range.
• Reset the telephone base. Unplug the electrical
power. Wait for 15 seconds, then plug it back in.
Allow up to one minute for the cordless handset and
telephone base to reset.
• Other electronic products such as HAM radios and
other DECT phones can cause interference with your
cordless phone. Try installing your phone as far away
as possible from these types of electronic devices.
I cannot get a dial tone.
• Try all the suggestions above.
• Move the cordless handset closer to the telephone
base. You may have moved out of range.
• If the previous suggestions do not work, disconnect
the telephone base from the telephone jack and
connect to a different phone. If there is no dial tone
on that phone either, the problem is in your wiring or
telephone service. Contact your telephone service
provider.
• Your line cord may be defective. Try installing a new
line cord.
I cannot dial out.
• Try all the suggestions above.
• Make sure you have a dial tone before dialing. The
cordless handset may take a second or two to ind
the telephone base and produce a dial tone. This is
normal. Wait an extra second before dialing.
133