VTech 15750 User Manual page 42

• If there is another headset already active, the
screen will show Only the BT headset in slot 2
can be ready for connection and prompts you to
replace an existing paired device.
5. Press NEXT. The screen displays Pls set headset
to discoverable mode. Set your headset to
discoverable mode (refer to the user's manual of
your headset), and then press NEXT.
6. The screen displays Searching for Bluetooth
headsets....
7. When the screen displays the found devices, press
or to highlight your headset if necessary, and
then press SELECT.
• Enter the PIN of your headset if required. The PIN
for most Bluetooth devices is 0000 (refer to the
user's manual of your headset), and then press
NEXT.
. The screen displays Adding Headset A... when the
base is connecting to your headset.
9. When a device is successfully connected,
telephone handset displays Headset A is added
and connected to base and the corresponding
status icon
corresponding light on the telephone base
MOBILE 1
(
. You hear a conirmation tone. The

MOBILE
or
4
2) turns on.
the