To change the remote access code:
MENU
1.
Press
.
Press
SELECT.
3.
Press
SELECT.
4.
Press
SELECT.
5.
Use the dialing keys to enter a two-digit number.
SAVE
6.
Press
Note: Remote access can only be used if this function
is activated.
MEssAGE ALERT TONE
When the message alert tone is set to On, and there is
at least one new message, the telephone base beeps
every ten seconds.
alert tone is set to off.
There is no audible alert at the handset.
To turn the message alert tone on or off:
MENU
1.
Press
.
Press
SELECT.
3.
Press
SELECT.
idle mode to enter the main menu.
to highlight Answering sys, then press
or
to highlight Ans sys setup, then press
or
to highlight Remote code, then press
or
to conirm. You hear a conirmation tone.
Unless you change it, the message
idle mode to enter the main menu.
to highlight Answering sys, then press
or
to highlight Ans sys setup, then press
or
10