VTech 15750 User Manual page 125

• During a one-to-group broadcast call, press
HOME/
broadcast call ends automatically and you get a dial
tone.
• During a one-to-group broadcast call, press
HOME/
handsets. That device gets a dial tone. The broadcast
call continues for the rest of the OTB participants.
END OR LEAVE A bROADCAsT CALL
For one-to-one broadcast calls, both initiating and
destination handsets can end the broadcast call.
For broadcast calls to multiple devices, the initiating
handset can end the broadcast call. If any one of the
destination handsets leaves the broadcast call, the call
continues until all participants or the initiator hangs up.
OFF/
Press
shows Broadcast Ended.
-OR-
Place the handset in the telephone base or charger,
then the handset return to idle mode.
Note: After OTB on the handset or OTB on the
telephone base is released, the broadcast call
remains open for a short time. If no one presses OTB
on the handset within ten seconds, the broadcast call
ends automatically.
on the initiating handset. The
RECALL
on any one of the destination
RECALL
END
or
CLEAR
on the handset. The screen
15