Outdoor Fan Control - Fujitsu AG * V09LAC Series Service Instruction

6. OUTDOOR FAN CONTROL

(1). Fan Speed
( Table 6 : Outdoor fan speed )
AG*V09LAC
AG*V12LAC
AG*V14LAC
Refer to Fig1.
* It runs at 500(A-D ZONE)/200(E,F ZONE) rpm for 20 seconds after starting up the outdoor fan.
* The outdoor fan speed mentioned avobe depends on the compressor frequency.
(When the compressor frequency increases, the outdoor fan speed also changes to the higher
speed. When the compressor frequescy decreases, the outdoor fan speed also changes to the
lower speed.)
* Outdoor temperature falls, and if it becomes E and F zone(
will fall.
* After the defrost control is operated on the heating mode, the fan speed keeps at the higher speed
as table 7 without relating to the compressor frequency.
( Table 7 : Outdoor fan speed after the defrost )
AG*V09/ 12LAC
AG*V14LAC
ZONE Cooling
A - C
800/ 760/ 470
D
470/ 250
E
500 150 (by 1rpm or more)
F
300 150 (by 1rpm or more)
A - C
860/ 820/ 670/ 500
D 500/ 280
E 470 150 (by 1rpm or more)
F 300 150 (by 1rpm or more)
Min
900rpm
950rpm
Dry
760/ 470
760/ 470
500
500
Refer to Fig1)
05-07
(rpm)
Heating
760/ 680/ 470
820/ 750/ 670/ 550/ 450
, rotations of fan speed