Playing Sound From The Video Equipment - Epson EMP-74 User Manual

Playing Sound from the Video Equipment

The projector has a built-in speaker with a maximum output of 1 W. You can
output sound from the connected video equipment (such as a computer or
video deck) through the projector's built-in speaker if the video equipment has
an audio output port.
Select the audio cable that is used for this connection from the following,
depending on the shape of the other equipment's port.
• If connecting to a stereo mini jack (such as the audio output port of a
computer): Use a commercially-available stereo mini jack audio cable to
make the connection.
• If connecting to an RCA pin jack
port of video equipment): For EMP-74/54, use the accessory A/V cable to
make the connection. For EMP-74L, use the accessory audio adapter and a
commercially-available RCA audio cable.
The default setting for the "Audio Input" command in the "Audio" menu is
"Audio1" when analogue RGB images from a computer or RGB video images
or component video images are being input, and "Audio2" when composite
video and S-Video images are being input. Change the setting depending on
the equipment being connected, or select the appropriate audio input port.
TIP
• You can adjust the volume after projection has started.
• If using a commercially-available 2RCA (L/R)/stereo mini-jack
audio cable, use one that is marked as "No resistance".
2 (red/white) (such as the audio output
×
p.26
When connecting to the [Audio1] port
To audio output port
Stereo mini jack audio cable
(commercially-available)
When connecting to the [Audio2] port
To audio output port
A/V cable (white/red)
(supplied with EMP-74/54)
For EMP-74L, use the accessory audio adapter and a commercially-
available RCA audio cable.
25
To [Audio1] port
To [Audio2] port