If The Monitor Port Is A 5Bnc Port - Epson EMP-74 User Manual

Connecting to a Computer
If the Monitor Port is a 5BNC
Use the optional VGA- HD15/BNC PC Cable to make the connection.
See "Appendices: Optional Accessories"
To monitor port
VGA- HD15/BNC PC Cable
(optional)
TIP
• After projection starts, change the "Input Signal" setting in the
"Image" menu to either "Computer1" or "Computer2" to match the
signals from the port being used for the connection.
• If more than one external component is connected to the projector,
after projection starts, use the [Computer1/2] button on the remote
control or the [Source] button on the projector's control panel to
select the Computer port as the input source
Port
p.93
To [Computer1/Component
Video1]
or [Computer2/Component
Video2] port (blue)
p.52
p.34
18