The Front Panel Leds - ZyXEL Communications ZyWall 2we Compact Manual

LABEL
RESET

2.2 The Front Panel LEDs

The PWR LED turns on when you connect the power. The SYS LED blinks while performing
system testing and then stays on if the testing is successful. The CON/AUX, LAN, and WAN LEDs
turn on if the ports are properly connected.
LED COLOR STATUS
PWR Green
SYS Green
Red
ZyWALL 2WE
You only need to use this button if you've forgotten the ZyWALL's password. It returns
the ZyWALL to the factory defaults (password is 1234, LAN IP address 192.168.1.1,
terminal emulation settings as described above etc.; see your User's Guide for details).
On The ZyWALL is turned on.
Off The ZyWALL is turned off.
Off The ZyWALL is not ready or failed.
On The ZyWALL is ready and running.
Flashing The ZyWALL is rebooting.
On The power to the ZyWALL is too low.
DESCRIPTION
MEANING
6