ZyXEL Communications ZyWall 2we Compact Manual page 12

ZyWALL 2WE
Point-to-Point Protocol over
Ethernet (PPPoE) functions as a
dial-up connection. Therefore you'll
also need a username and
password and possibly the PPPoE
service name. Your ISP will give
you all needed information.
Select Nailed Up Connection if you
do not want the connection to the
PPPoE server to time out.
Otherwise, enter the number of
seconds to elapse before the
ZyWALL disconnects from the
server in the Idle Timeout field. The
default value is 100 seconds. Enter
"0" to prevent the connection from
timing out.
Click Next to continue.
Choose PPTP if your service
provider uses a DSL terminator with
PPTP login. The ZyWALL must
have a static IP address (My IP
Address) in this case, and possibly
a subnet mask (My IP Subnet
Mask) if provided by your ISP.
You'll also need a username,
associated password, and the DSL
terminator IP address (Server IP
Address). If your ISP has provided
a connection ID name, enter it in the
Connection ID/Name field.
See the PPPoE encapsulation
above for information on the Nailed
Up Connection and Idle Timeout
fields.
Click Next to continue.
Step 3. Fill in the fields and click Finish to save and complete the wizard setup.
12