Main Features; Panel Description And Functions; Top Panel - Vox VT100X Owner's Manual

Main Features

• The multi-stage tube amplifier circuit in the pre-amp allows the
VT100X to reproduce the unique distortion, touch sensitivity, and the
response that is characteristic of classic tube amps.
• The revamped algorithm recreates analog circuits and allows users
to adjust parameters such as the gain and bias (operating point) of the
tube in real time, resulting in an authentic amplifier experience.
• When using certain models, the amp can be switched between Class A
and Class AB operation and, by altering the impedance variation of the
speaker, it can reproduce a sound unique to a tube power amplifier.
• Manage programs and customize amps and effects by using the included
Editor/Librarian software that is compatible with Windows, Mac or iOS.
• The power level control lets you adjust the output wattage of the power
amp.
• Sophisticated modeling technology is used to provide numerous amp
models and high-quality effects.
• You can simultaneously use up to four effects including noise reduction.
• Create your custom sound using the desired amp and effect
combination, then easily save it as one of eight programs (two banks
× four channels). Saved programs can easily be switched from the top
panel or with an optional foot switch (sold separately).
• For each amp model, three preset programs with preset songs are provided
to reproduce the tones of classic hits played by famous guitarists.
• Manual mode lets you use the VT100X as a conventional guitar amp. The
physical positions of the actual knobs will be reflected in the sound.
• The built-in tuner allows for easy tuning of your guitar.
• The AUX IN jack allows you to connect an external audio player,
allowing you to play guitar along with recorded music.

Panel description and functions

Top panel

a
d
a . INPUT jack
This is where you plug in your guitar.
b . Amp section
PRESET PROGRAMS button
This switches between the preset programs mode and
manual mode.
Press the PRESET PROGRAMS button once to enter the
preset programs mode. Each press of the button switches
the setting in the following order: preset A (green), preset B (yellow-
green), preset C (red).
Hold down the PRESET PROGRAMS button for at least one second to
switch to manual mode ("About the three modes" on page 7).
AMP MODELS knob
This selects the amp model.
The characteristics and location of the gain and
tone controls in the circuit will change according
to the amp model that is selected. Additionally,
- 4 -
b c
e f g h