Top Panel Features; Specifications - Vox T25 Bass Amplifier Manual

About your bass amplifier:
You have purchased a genuine VOX Bass amplifier. The T-25 has been designed and built with the same care and
attention to detail that we have given to all of our amps since 1957. It will bring you many years of great VOX tone.
Please take time to read this manual carefully so you can enjoy your amplifier and understand its capabilities.
ACTIVE PASSIVE
1. Input Jack: This unit is equipped with two input jacks.
The gain of the "High" input is higher than that of the
"Low" input. An example for using both inputs simulta-
neously would be to connect the "High" input to a bass
and the low input to a drum machine or keyboard, in
order to create a personal rehearsal environment.
2. Volume Control: Controls the overall volume of the
amplifier.
3. Treble Control: Cuts or boosts the high frequencies.
Moving the knob clockwise from the zero center position
boosts, moving it counter-clockwise cuts the high fre-
quencies.
4. High-Mid Control: Cuts or boosts the higher middle
frequencies. Moving the knob clockwise from the zero
center position boosts, moving it counter-clockwise cuts
the higher middle frequencies.
•Dimensions (W x H x D): 540mm x 400mm x 305mm / 21-1/4" x 15-3/4" x 12" •Weight: 14.0 kg / 30.86 pounds
•Power consumption: 25 W (RMS) •Speaker: Vox Bass Custom 10 inches x 1 (8 ohm), Horn Tweeter x 1 •Inputs:
Input jack x 2 (High, Low) •Headphone jack •Controls: Volume, Treble, High-Mid, Low-Mid, Bass •Bassilator Switch
©2000 VOX AMPLIFICATION LTD.
CONGRATULATIONS!

Top Panel Features

Specifications

5. Low-Mid Control: Cuts or boosts the lower middle
frequencies. Moving the knob clockwise from the zero
center position boosts, moving it counter-clockwise cuts
the lower middle frequencies.
6. Bass Control: Cuts or boosts the bass frequencies.
Moving the knob clockwise from the zero center position
boosts, moving it counter-clockwise cuts the bass fre-
quencies.
7. Bassilator: When this switch is set to the "ON" posi-
tion, the low end is emphasized and sub-bass harmonics
are added to create a rich, punchy bass tone.
8. Headphone Jack: Output for connection to head-
phones. When headphones are connected, the speaker is
muted so the sound is only heard through the headphones.
9. Power Switch: When the power switch is set to the
"ON" position, a status LED indicates the amp is operating.
*Specifications are subject to change without notice.
EXT.
SPEAKER
Printed in Korea