T
S
ERMINAL
ETUP
Using the Smart Card Reader
Using the Smart
Card Reader
To conduct a smart
card transaction
CAUTION
Using the
Magnetic Card
Reader
To conduct a credit or
debit card transaction
30
VX 520-G I
NSTALLATION
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3
Remove the card only when the application indicates the transaction is
complete.
Figure 23
Inserting a Smart Card
Leave the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.
The VX 520-G terminal supports credit or debit card transactions.
1
Position a magnetic card with the stripe in the card reader and facing inward,
toward the keypad.
2
To ensure a proper read of the magnetic swipe card, the user should insert the
magnetic card from the top of the unit, as shown in
3
Swipe the card through the magnetic card reader.
Figure 24
Using the Magnetic Card Reader
G
UIDE
Figure
23).
Figure
24.