Preset Position Settings; Preset Position Item Flow - Sanyo VCC-9300P Instruction Manual

PRESET POSITION SETTINGS

The PRESET POSITION function stores surveillance locations in memory. Up to 64 positions can be stored, and these surveillance locations
can be viewed in order by sequential automatic display. In addition, a title can be set for each of the stored surveillance locations and each
location can have a camera settings pattern assigned to it (from among 9 different patterns in the "VIEW SETTING (Camera settings)" menu
item).

PRESET POSITION item flow

1
Select PRESET POSITION
ENTER
2
Select a PRESET number (Example: 3)
ENTER
3
Set parameters for the preset number (3)
A
B
C
D
E
4
Decide on a surveillance position for the preset number
(3)
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE PAN ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
PRESET NO.SELECT
1:0 11:X 21:X 31:X
2:X 12:X 22:X 32:X
3:X 13:X 23:X 33:X
4:X 14:X 24:X 34:X
5:X 15:X 25:X 35:X
6:X 16:X 26:X 36:X
7:X 17:X 27:X 37:X
8:X 18:X 28:X 38:X
9:X 19:X 29:X 39:X
10:X 20:X 30:X 40:X
PRESET NO.SELECT
41:X 51:X 61:X
42:X 52:X 62:X
43:X 53:X 63:X
44:X 54:X 64:X
45:X 55:X BACK
46:X 56:X
47:X 57:X
48:X 58:X
49:X 59:X
50:X 60:X
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
TITLE OFF
CAMERA VIEW 1
PAUSE TIME 5S
MENU BACK
PRESET SETTING PRESET SETTING PRESET SETTING
SET SET SET ‚ ‚
– 10 –
(Example of camera movement after setting)
CAM-1 FLOOR-4 CAM-1 FLOOR-4 CAM-1 FLOOR-4
Surveillance position 4
No.4
CAM-1 FLOOR-1 CAM-1 FLOOR-1 CAM-1 FLOOR-1
Surveillance position 1
(Selecting preset numbers)
In this screen you can select which preset number you want to use
for a particular surveillance location. Factory settings are shown
below.
•
Number 1: "0" (This is reserved for the home position and
always shows 0. It cannot be changed.)
•
Numbers 2 – 64: "X" shows the initial setting. When a preset
number is utilized, the signal letter changes to "0".
Two screens are used to present all the preset numbers. Use the
joystick to switch to the other screen.
To cancel a preset setting operation, move the cursor to BACK and
then press the ENTER button.
(Preset number item settings)
A
PRESET NO.:
The preset number (3) selected is shown.
B
DELETE:
Select this item to delete stored information for this preset number.
PRESET NO. 1 represents the home position and cannot be
deleted, so the DELETE command is not shown for number 1.
C
TITLE:
This item sets the camera ID and title for the preset number.
When a title is set, it will be superimposed on the screen for that position.
D
CAMERA VIEW:
This enables adding of camera setting patterns made in the VIEW
SETTING menu item. Only the number for the detailed settings file
(0 – 8) can be entered here. (See p00)
E
PAUSE TIME:
This item sets the duration of pauses at surveillance locations
(Preset positions) when using sequential automatic display
(Sequential pan).
CAM-1 FLOOR-3 CAM-1 FLOOR-3 CAM-1 FLOOR-3
Surveillance position 3
No.3
No.2
CAM-1 FLOOR-2 CAM-1 FLOOR-2 CAM-1 FLOOR-2
Surveillance position 2
English