View Setting Item Flow - Sanyo VCC-9300P Instruction Manual

CAMERA SETTINGS
D VIEW SETTING item flow
1
Select CAMERA
ENTER
2
Select VIEW SETTING
ENTER
A
B
C
D
E
F
G
Note:
• • • •
In any of these screens, moving the cursor to PRESET and
changing to ON will reset the values back to initial settings.
• • • •
Moving the cursor to BACK for MENU and press the ENTER
button will return the screen to the previous item.
• • • •
With the cursor at BACK, using the joystick lever (d or c) to
change to END and press the ENTER button to return the
screen to normal viewing.
English
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SQE ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
Signifies that CAMERA SETTING
1 is set.
In the CAMERA SETTING screen,
the joystick lever can be used (d or
c) to select from VIEW SETTING 1
to another of the nine VIEW
SETTING patterns.
Available settings:
• 0:
• 1 ~ 8:
IRIS: (See p00)
A
IRIS SETTING
BLC OFF
SENSE UP OFF
(LEVEL)
PRESET OFF
MENU BACK
WHITE BALANCE: (See p00)
B
ATW SETTING
MASKING OFF
SMART ATW OFF
PRESET OFF
MENU BACK
SHUTTER: (See p00)
C
ES SETTING
SHUTTER SPEED 50
PRESET OFF
MENU BACK
MOTION: (See p00)
D
MOTION SETTING
SIZE SET
MASKING OFF
SENSITIVITY SET
ZOOM OFF
INTERVAL 5S
PRESET OFF
MENU BACK
APERTURE: (See p00)
E
APERTURE SETTING
H
V
PRESET OFF
MENU BACK
AGC: (See p00)
F
GAIN SETTING
MAX GAIN ±0·
DNR OFF
PRESET OFF
MENU BACK
IRIS: (See p00)
G
This setting enables contrast sensitivity to be boosted by controlling
the gamma characteristics. Three gamma controls are available:
gamma correction (ON), smart gamma correction 1 (SMART 1),
and smart gamma correction 2 (SMART 2). Initial setting is ON.
– 21 –
This setting allows selection of IRIS to
either autoiris (AUTO) or manual iris
(MANU). Initial setting is autoiris.
40
This selects the white balance method to
be used. Three white balance methods
are available: full-time automatic white
balance (ATW), one-time automatic
white balance correction (AWC), and
manual white balance (MWB). Default
setting is full-time automatic white
balance.
This setting chooses either a fast shutter
speed (SHORT) for target objects that
may be moving quickly or a slower
shutter speed (LONG) for darker target
objects.
This function generates an alarm when a
suspicious figure is detected. Each of the
‚
settings will enable certain kinds of
‚
detection based on the natural image
(swaying trees, flickers of light, etc.). It is
also possible to enable zooming in on
target objects and intruders that have
unusual brightness levels (moving,
bright) or are fast-moving.
This setting emphasizes the target object
profile (horizontally or vertically).
8
8
This sets the gain of the AGC circuit.
When a target object is dark, the gain
changes and the object becomes lighter.