Sanyo VCC-9300P Instruction Manual page 13

PRESET POSITION SETTINGS
C The Camera ID and TITLE setting screen
TITLE SETTING
ABCDEFGHIJKLN
1
NOPQRSTUVWXYZ
0123456789 :-
ID
2
???????? ????????
POSITION
3
PRESET NO.
4 PRESET
MENU
5
1
The letter selection palette:
By moving the cursor to letters or numbers in this palette, you
can select characters.
Selected characters will appear in the corresponding field under
ID or TITLE.
2
ID/TITLE:
Enter the ID or title. Use the joystick lever (j l d c) to move
the cursor to the first position of the ID or TITLE field.
Note: Entering even one character in the ID or TITLE field will
cause all of the question marks in the field to disappear.
Continue entering the ID or title you desire.
•
ID: The camera's ID can only be set when making
settings for PRESET number 1.
•
TITLE: A title can be set for each preset position.
3
POSITION:
Select the style in which the ID and/or title will appear, either
horizontally (H) or vertically (V).
4
PRESET NO.:
When ON is selected for this setting, the preset number is
displayed in front of the camera ID on the surveillance screen.
5
PRESET:
When this item is turned to ON, the ID and TITLE fields are
cleared (question marks appear). Use this function when you
want to change the ID or TITLE.
Horizontally (H) position display
TITLE SETTING
ABCDEFGHIJKLN
NOPQRSTUVWXYZ
0123456789 :-
ID TITLE
CAM1 FLOOR-1
POSITION H ‚
PRESET NO. ON
PRESET OFF
MENU BACK
Vertically (V) position display
TITLE SETTING
ABCDEFGHIJKLN
NOPQRSTUVWXYZ
0123456789 :-
ID TITLE
CAM1 FLOOR-1
POSITION V ‚
PRESET NO. ON
PRESET OFF
MENU BACK
TITLE
H ‚
ON
OFF
BACK
1 CAM1 FLOOR-1
TITLE name
ID No.
Preset No.
1
CAM1
FLOOR-1
Preset No.
ID No.
TITLE name
– 12 –
Camera ID setting
Example: Setting the camera ID to "CAM 1"
1
Select PRESET POSITION 1, then use the joystick lever
(j or l) to move the cursor to TITLE, and use the
joystick lever (d or c) to change ON.
2
Use the joystick lever (j l d c) to move the cursor to
the first position (?) of the ID field.
ID
???????? ????????
-
3
Use the joystick lever (j l d c) to move the cursor to
the letter "C" in the letter selection palette, then press the
ENTER button.
ID
C??????? ????????
-
4
Use the same steps to select "A", "M" and "1" from the
palette.
The characters "CAM1" appear in the ID field.
ID
CAM1???? ????????
-
TITLE setting
Example: Setting the TITLE to "FLOOR-1"
1
Use the joystick lever (j or l) to move the cursor to the
first position (?) of the TITLE field.
ID
CAM1???? ????????
-
2
Enter a title using the same method given for camera ID
setting.
ID
CAM1???? FLOOR-1?
PRESET SETTING
PRESET NO. ***
DELETE SET
TITLE ON
CAMERA VIEW OFF
PAUSE TIME 3S
MENU BACK
TITLE
TITLE
TITLE
TITLE
TITLE
-
English
‚
‚