Table of Contents
Advertisement
AUTOMATIC MODE SETTINGS
NOTE: When the various automatic modes are being controlled from the system controller, the settings for the number that is
currently displayed in the menu settings will be carried out.
A Preset position settings
(PRESET POSITION)
1
Press the MENU button.
MENU
Tilt the joystick lever to j or l to select
2
"AUTO MODE", and then tilt it to c.
Setting a new preset position
3
Select "PRESET POSITION", and then tilt
the joystick lever to c.
The preset position setting screen will be displayed.
·PRESET No.
TITLE: 0000000000000000
SETTING
SHOW CURRENT
SHOW NEXT
BACK
4
Setting a preset number
1
Select "PRESET No.", and then tilt the joystick
lever to c.
The "PRESET No." setting will flash.
2
Tilt the joystick lever to j or l to set the number,
and then tilt it to d.
Available settings: 001–080
Setting a name
5
Select "TITLE", and then tilt the joystick
lever to c.
The "TITLE" setting will flash.
Enter the preset position title.
6
Tilt the joystick lever to j or l to change each
character, and tilt it to d or c to move the flashing
cursor to a different position.
Tilt the joystick lever to d and hold it there until
displayed. This completes the setting.
Available settings: 0–9, A–Z, a–z, blank
SYSTEM INFORMATION
LENS
CAMERA
PAN/TILT PARAMETERS
·AUTO MODE
PRIVACY MASK
END
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
FUNCTION IDLE:OFF
FUNCTION
:OFF
·BACK
:
001
·
is
7
Setting a preset position
1
Select "SETTING", and then tilt the joystick lever
to c.
The "CALL PRESET 1 TO CONFIRM ......" screen will
be displayed.
Move the joystick lever to move the camera to the
preset position.
2
Press the "1" numeric button, and then press the
ENTER button.
The setting will be accepted.
CALL PRESET 1 TO
CONFIRM......
Use the same procedure to select other preset positions.
Select "BACK", and then tilt the joystick
8
lever to c to complete the setting.
Checking a preset position
1
Select "PRESET POSITION", and then tilt
the joystick lever to c.
The preset position setting screen will be displayed.
After selecting the preset number, tilt the
2
joystick lever to j or l to select "SHOW
CURRENT", and then tilt it to c.
The current preset position will be displayed.
PRESET No.
TITLE: 0000000000000000
SETTING
·SHOW CURRENT
SHOW NEXT
BACK
3
Select "SHOW NEXT", and then tilt the
joystick lever to c.
The position for the next preset number will be displayed.
Select "BACK", and then tilt the joystick
4
lever to c to complete the setting.
- 34 -
1
ENTER
:
001
English
Advertisement
Table of Contents
