Preset Memory; Preset Position - Sanyo VCC-HD4600P User Manual

You can change zoom magnification by operating the slide bar and buttons.
(WIDE): Zooms out.
(TELE): Zooms in.
Zooming continues if the button is kept depressed.
In case electronic zoom is enabled, you can activate the electronic zoom by clicking the
after the maximum optical zoom magnification (10x) is exceeded.
Electronic zoom magnification: 2x, 4x, 8x, 16x
Click the buttons to adjust the focus.
(NEAR):
(FAR):
(AUTO FOCUS): Automatic focus

PRESET MEMORY

Select the number (1 to 8) to register from the pull-down menu, and click
The current zoom and focus status is registered as a preset position with the number you select.

PRESET POSITION

Click the preset position number button (
The camera restores the zoom and focus status registered with the number.
While monitoring the subject on the live screen, you can use the digital PTZ function to clip specific areas of the
subject in VGA size and perform the following operations just as when using a PTZ camera.
To perform this operation, you need to set [DIGITAL PTZ] to "ON" on the VIDEO & AUDIO SETTINGS screen
(administrator configuration screen).
This enables the DIGITAL PTZ
(hereinafter referred to as "controller").
A
Clipping areas of subject
B Zooming
C Displaying clipped areas sequentially
D
Automatic panning/tilting
E
Manual panning/tilting
Focus on a near object
Focus on a distant object
1 8
to ).
button on the control panel, so you can display the digital PTZ controller
MEMORY button.
Working with Live Screen 6/20
button