Sanyo VCC-9300P Instruction Manual page 34

CAMERA SETTINGS
Aperture Profile compensation setting
E
(APERTURE)
Set this function to further emphasize the profile of the target
object. The amount of compensation can be adjusted for horizontal
or vertical directions.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
APERTURE, then press the ENTER button.
The APERTURE SETTING screen will appear and the "H"
value will be blinking.
ENTER
4
Select the amount of profile compensation
Available settings: 0 – 15 (Compensation intensity)
1
Set the horizontal profile compensation
Use the joystick lever (d or c) to adjust the value for "H"
(horizontal).
2
Set the vertical profile compensation
Use the joystick lever (j or l) to move the cursor to "V"
(vertical), then use the joystick lever (d or c) to adjust the
value for "V".
5
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING 1 screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
English
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
APERTURE SETTING
H 8
V 8
– 33 –
Agc Automatic gain control (AGC) setting
F
Sets AGC to ON or OFF and adjusts the gain.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
AGC, then press the ENTER button.
The GAIN SETTING screen will appear and "±0dB" for MAX
GAIN will be blinking.
ENTER
4
Use the joystick lever (d or c) to select the gain.
Available settings: ±0dB, +6dB, +9dB, – 6dB
5
Use the joystick lever (j or l) to move the cursor to
DNR, then use the joystick lever (d or c) to turn the
function ON or OFF.
•
ON: DNR (Digital Noise Reduction) is applied. Noise from
low light will be reduced.
•
OFF: DNR will not be applied.
Note: Digital noise reduction works as gain control becomes
greater. If images for moving target objects have blurs or
afterimages, reduce the resolution sensitivity.
6
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING 1 screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
GAIN SETTING
MAX GAIN ±0·
DNR OFF