Avaya 1140E User Manual page 207

Scenarios for the use of the USB screens are as follows:
Scenario 1 - If you want to copy an image file from the USB drive into
the IP Deskphone:
• Log on to the device and plug the USB flash drive into the
IP Deskphone USB port.
• Press the Services
• Select Flash Disk
• Select the file you wish to copy and then press Send.
• You are prompted to select the device you wish to send the selected
file.
• Select the IP Deskphone as the destination device.
• The file is validated based on the file extension and the passing of the
validation routines and a handler is called for the file. In this case, the
image file copies the images directory of the flash file system on the
IP Deskphone.
• A success message appears on the screen displaying that the file is
copied to the IP Deskphone successfully.
After a file is selected, there can be multiple reasons why the handling
cannot complete. The file size may exceed allowed limits, there may not
be enough space on disk, a file with the same name may already exist, or
actions on the selected file type may not be allowed (configuration flag).
Error conditions display a message on the screen, and any action that
may take some time to complete displays the In progress... message.
Scenario 2 - If you want to copy the ring tone from the IP Deskphone
into the USB drive:
• Log into the device and plug the USB flash drive into the USB port of
the IP Deskphone.
• Press the Services
• Select the IP Deskphone from the select device screen.
• The contents of their IP Deskphone are displayed. Navigate to
Sounds folder.
hard key and choose
device. The contents of the device are displayed.
hard key and choose
Configuring custom settings
File Manager.
File Manager.
207