Avaya 1140E User Manual page 201

• Pressing the
the password for the screensaver. The primary user line key is
displayed (but not active) during the password prompt to give an
indication about whose password is in use.
• Picking up the handset and dialing digits activates the line function
display for emergency calls only. If you try to place an outgoing call, a
message is displayed and the screensaver starts again.
• If you make an emergency call while the screensaver is active, the
call is placed using the primary user.
• The Network menu is accessible to administrators (double press of
the services key) even when the screensaver is active.
• If user-defined passwords are allowed, a mechanism to disable the
screensaver (allowing the administrator to reset the user-defined
password) is accessible through the network menu. This mechanism
also invokes remotely from the IP Deskphone console through an
SSH connection.
• All expansion modules are cleared of programmed keys until the
screensaver is deactivated.
• If you reboot the IP Deskphone when there is an active screensaver:
— If autologin is enabled, then the screensaver remains active after
the IP Deskphone reboots and completes the login.
— If autologin is not enabled, then the screensaver setting remains
enabled but not active after you log back into the IP Deskphone
manually.
Selecting an image to be viewed as a slideshow.
You can display all of the screensaver images that have been uploaded to
your IP Deskphone in a slideshow format.
These files are loaded on the IP Deskphone using the USB flash drive.
Images for the 1140E IP Deskphone cannot exceed 128 KB. The images
must be resized before they are loaded onto the IP Deskphone. The
image size for the 1140E is 240 x 88.
Images can be displayed as a slideshow. Choose Prefs, Display,
Display Screensaver,
Unlock context-sensitive soft key prompts you to enter
Images and then select Slideshow.
Configuring custom settings
201