Sony mvc-cd250 Operating Instructions Manual page 69

~W~~~ fully down.
The image will be recorded with the
proper focus for the subjects.
0 You can carry out the AF lock adjustment
process any number of times before you press
the shutter button fully down.
When shooting an image using a preset
distance to the subject, or when shooting a
subject through a net or window glass, it is
difficult to achieve a proper focus using the
auto focus function. The Focus preset
function is useful in these cases.
* MVC-CD400 only
@ Focus setting information is approximate. and
should be used as a reference.
e If you point the lens up or down, the
error
will
increase.
@ If you shoot a subject within 0.5 m
(19 3/4 inches) with the zoom set to the T side,
you may not get a clear focus. In such cases, the
focus setting information flashes. Press the
zoom W button until the indicator stops
flashing.
e The focus preset does not work properly when
attaching a conversion lens.
Mode dial
The focus is fixed and the Q (manual
focus) indicator appears.
You can select from the following
distance settings:
0.1,0.2,0.3,0.5,0.8, 1.0, 1.5,2.0,3.0,
5.0,7.0, 10, 15; and -(infinity)
focus setting information disappears.