Sony mvc-cd250 Operating Instructions Manual page 120

*
Do not use any solvent (benzine, thinner,
static protection product, record cleaner.
etc.) to clean a disc.
* Do not store a disc in the following locations:
- Iu dusty or diiy places
- Exposed to direct sunlight
- Near heaters
I .
- In damp places
kmes
@ Do not remove the disc while reading or writing
data.
e Data may be damaged if:
- You remove the disc or shake the camera
while reading or writing data.
@
If
you attempt to play back a disc on which no
images have been recorded using a disc drive,
the disc drive may malfunction or the disc may
be
scratched.
- You turn off your camera while reading or
writing data.
- You use the camera in a location
subject to
the effects of static electricity or noise.
*J Do not attach any material on the surface of a
disc. This causes a nonuniform rotating speed,
which may cause the camera to malfunction.
@ You can write
only on the label surface of a
disc. Write using only an oil-based felt-tip
marker and do nor touch
the ink until &y. Do
not heat the disc or use a sharp-pointed tool,
such as a ballpoint pen.
0 Hold the disc at the edges while supporting the
center hole lightly. Do not touch the
recordable
side (the reverse of the printed side) of a disc.
* When you carry or
store
a disc. put it in iLc case.
e Do not strike, bend, drop or rub the edge of a
disc.
M" battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your camera
and the AC power adaptor.
The
"infoLITHIUM" battery
pack
calculales the power consumption
according to the operating conditions of
your camera, and displays the remaining
battery time in minutes.
0 We recommend chaxging the battery pack
in an ambient temperature of between
IOT to 30°C (50°F to 86" F). You may
not be able to efficiently charge the
batlery pack outside of this temperature
range.
0 We recommend My charging the battery
pack (page 13).