Sony mvc-cd250 Operating Instructions Manual page 16

e Connect the AC power adaptor to an easily
accessible wall outlel (wall socket) close by. IF
some
irooble
occurs
while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
I (wall socket).
* Remove the battery pack when using an
external power source.
* When you have finished using the AC power
adaptor, disconnect it from tile DC IPI' jack of
the camera.
e To use power from an automobile, use the Sony
DC adaptor/charger (not supplied).
0 If you insert or remove the DC plug while you
are using the battery, the power may shut off.
Power sourcee
You can use your camera in any country or
area with the supplied battery charger
within 100 V to 240 V AC, 5W60
Hz. Use a
commercially available AC plug adaptor
[a], if necessary, depending on the design of
the wall outlet (wall socket) [$I.
* Do not use an electronic transformer (travel
converter). as this may cause a malfunction.