Sony mvc-cd250 Operating Instructions Manual page 103

-
The camera is turned off.
* The battery level is low.
You are not using the supplied USB cable
The USB cable is not connected firmly.
0 The USB connectors on your computer are
connected to other equipment besides the
keyboard, the mouse, and your camera.
PIXELA PTP Manager is not installed.
s The camera was connected to a computer with
the USB cable before installing PIXELA PTP
Manager, so the device was not recognized by
the computer.
* The camera is not correctly connected to your
computer.
* You are not using the correct copy procedure for
your OS.
+ Check "Recommended computer environment" (page 51).
+ Turn on the camera (page 17).
+ Use the AC power adaptor or a fully charged battery back.
-f $i%zipplied USB cable.
+ Disconnect the USB cable, and connect it again firmly. Make
sure that "USB MODE" is displayed on the LCD screen
(page 56).
+ Discomwct the USB cables except for the ones connected to the
keyboard, the mouse, and your camera.
+ install PMELA PTP Manager (page 52).
+ Delete the device which is not recognized, then install PIXELA
PTP Manager (pages 52 and QQ).
+ Connect the camera and your computer correctly using the US B
cable (pages 52 and 56).
+ Follow the designated copy procedure for your OS (page 51).
+ If you are using the "PIXELA ImageMixer ior Sony"
application software, click on HELP.
3 If you are using the "PIXELA ImageMixer for Sony"
application software. click on HELP.
+ Consult the conmuter or softwazc manufacturer.