Sony mvc-cd250 Operating Instructions Manual page 4

A moulded plug complying with BS 1363 is fitted
, to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or
BSI to BS 1362. (i.e.. marked with @ or $?
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the
plug without the fuse cover, If you should lose the
fuse cover. please contact your nearest Sony
service station.
DirectiwEMC Directive 89/336/EEC,
92/3
l/EEC
This eqiipment complies with the EMC
regulations when used under the following
circumstances:
a Residential area
* Business district
* Light-industry district
(This equipment complies with the EMC standard
regulations EN55022 Class B.)
This product has been tested and
found
compliant
with the limits sets out on the EMC Directive for
using connection
cables
shorter than 3 meters
(9.8 feetsf.
This statement is indicated under the lens.
The electromagnetic fields at the specific
frequencies may influence the picture and sound
of this camera.
If static eleclricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
USB cable again.