Sony mvc-cd250 Operating Instructions Manual page 118

Do mot carry the camera by the disc
ccpver
0 mot touch the rctat~m~ disc
This may cause injury.
When the pickup lens becomes dirty and the
camera cannot operate properly, clean the
pickup lens using a commercially available
blower.
Beas
Do not touch the pickup lens inside the disc
cover. Also, do not open the disc cover
except when inserting or removing a disc in
order to keep dust out.
caning tla
SW@&81
Wipe the screen surface with an LCD
cleaning kit (not supplied) to remove
fingerprints, dust, etc.
Wipe the lens with a soft cloth to remove
fingerprints, dust, etc.
$~aam~m~ the
PW
Do not use the
power adapter while the
DC plug is dirty. Wipe any dii off of the
plug with a cotton swab. A dirty DC plug
can prevent the unit from charging properly.
Clean the camera surface with a soft cloth
slightly moistened with water. then wipe
the surface dry. Do not use any type of
solvent such as thinner: alcohol or benzine
as this may damage the finish or rhe casing.
After using yslrir Camera
seashore or other dusty
at the
locations
Clean your camera carefully. Otherwise,
the salty air may corrode the metal fittings
or dust may enter the inside of your camera,
causing a malfunction.
wo tf?
Your camera is designed for use between
the temperatures of 0" and 40" (32" F and
104" F). Shooting in extremely cold or hot
places that exceed this range is not
recommended.
i&me $:
n
If the camera is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. Should this occur, the
camera will not operate properly.
when:
ensatiom occurs easily
0 The camera is brought from a cold
location such as a ski slope into a warmly
heated room.
a The camera is taken from an air-
conditioned room or car interior to the hot
outdoors, etc.