Sony mvc-cd250 Operating Instructions Manual page 100

0 The subject is too close.
* The Landscape mode or Portrait mode is
selected for the Scene Selection function.
* The Focus preset function is selected.
0 (CONVERSION LENS] in the SET UP settings
is set to [ON] (MVC-CD400
0nlyJ.
+ Record in the macro recording mode when you shoot a subject
that is within 4 to 50 cm (1 5/8 to 19 3/4 inches) for
MVC-CD400 or within 3 to 50 cm (1 3/16 to 19 3/4 inches) for
MVC-CD250 from the lens. Make sure to position the lens
farther away from the subject than the shortest shooting distance
when shooting (page 28).
+ Cancel the setting (page 33).
+ Cancel the function (page 69).
3 Set it to [OFF] (pages 62 and 117)
* [CONVERSION LENS] in the SET Up settings
is set to [ON] (MVCCD400 ordy).
e Zoom c:mnot be used when shooting a movie
(MPEG MOVIE) (MVCCD400 only).
--..
0 The digital zoom cannot be used when shooting
a movie (MPEG MOVlE).
* [DIGITAL ZOOM] in the SET UP settings is set
to roFF1.
+ Set it to [OFF] (pages 62 and 117)
-
-
-p Set it to [ON] (pages 62 and 116).
/ The image ie too &rk.
/ * You are shooting a subject with a light source / + Adjust the exposure (page 70).
I
behind the subject.
4 The brightness of the LCD screen is too low.
0 The LCD backlight is set to off.
+ Adjust the brightness of the LCD screen in the SET UP settings
(pages 62 and 117).
+ Turn the LCD backlight on.
/ 0 You are shooting a spotlighted subject in a dark 1 + Adjust the exposure (page 70j.
I
location such as on a stage.
0 The LCD screen is too bright.
+ Adjust the brightness of the LCD screen in the SET UP settings
(pages 62 and1 17).
+ Cancel [S&W] mode (page 83).
EFFECT] is set to @3&W] mode.
hrcame @lack and
I
+ This is not a malfunction.
-7
---i