Preventive Maintenance; Cleaning; Inspection - Nautilus TREADCLIMBER TC916 Owner's Manual

PrEvENTivE mAiNTENANCE

DRY MOP THE DECK
UNDER THE BELT ONLY.
DO NOT ADD ANY
LUBRICANTS. ADDING
LUBRICANTS CAN RUIN
THE PROPRIETARY
FRICTION-CONTROL
SURFACE.
DO NOT USE
DETERGENTS OR
CLEANING AGENTS ON
ANY PART OF THE DECK.
DO NOT LET
LIQUID ENTER THE
®
TREADCLIMBER
MACHINE OR CONSOLE
DISPLAY.
DO NOT REMOVE THE
®
TREADCLIMBER
DANGEROUS VOLTAGES
ARE PRESENT.
COMPONENTS ARE
SERVICEABLE ONLY BY
QUALIFIED SERVICE
PERSONNEL.
6

cleaning

1. DO NOT USE GLASS CLEANERS OR ANY OTHER
HOUSEHOLD CLEANERS ON THE CONSOLE. Clean the console
daily with a water-dampened cloth and wipe dry after cleaning.
2. Clean the exterior of the machine daily using soap and water or a diluted, non-
mineral based household cleaner such as Fantastic
3. Depending upon the environment the TreadClimber
lint can accumulate under the hood. Periodic internal cleaning should be done by
qualified service personnel.

insPection

1. Frame: Inspect the frame for any rust, bubbling, or paint chips during the weekly
cleaning. The salt in perspiration can damage the unpainted surfaces. Repair
the damaged area with a touch-up paint kit purchased from Nautilus, Inc. (call
Customer Service for order information).
2. Inspect the power cord and walking belt for wear.
3. Check the position of the treadle walking belts; be sure they are not rubbing
against the frame. The belts should be evenly spaced on the deck within 0.25 inch
(6.3 mm); adjust if necessary.
HOOD:
4. Remove potential hazards from the area the TreadClimber
in.
®
.
®
machine is in, dust and or
®
machine is positioned