Safety Instructions And Recommendations - Sagem PHOTO EASY 260 User Manual

Liasse AZUR_GB.book Page 2 Lundi, 23. mai 2005 11:31 11
S
AFETY INSTRUCTIONS AND RECOMMENDATIONS
• Do not install your photo printer in a humid room (bathroom, laundry,
kitchen, etc.), or within 1.50 m of a tap or water source, or outside. Your
printer should be used at an ambient temperature of between 15 °C and 35 °C
for optimum printing results.
• Do not set up your printer in a dusty environment as dust deposits might
adversely affect the print quality of your photos.
• Only the power supply provided with the printer should be used. Connect this
to the mains in accordance with the installation instructions in this user guide
and the information on the identification label affixed to the power supply
(voltage, current, mains frequency). As a precaution, in case of danger, the
mains adapters act as a disconnecting mechanism for the 230 V power
supply. They should be placed near the device and should be easily
accessible.
• Never open the cover of the film cartridge compartment during printing.
This could break the film and cause printer malfunction.
• Only use SAGEM consumables, if not you are likely to damage the
equipment and invalidate the guarantee. To obtain the references of the
consumables (Refer to paragraph Replacement of consumables, page 28).
• The CE marking certifies that the product meets the main requirements of the
European
telecommunications terminal equipment, regarding safety and health of users,
and regarding electromagnetic interference.
The declaration of compliance can be consulted on the site www.sagem.com
category "support", or can be requested at the following address:
SAGEM COMMUNICATION - Customer relations department
4 rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE
Parliament and Council
- 2 -
directive 1999/5/CE on