Prepare Your Photo Printer; Connect The Mains Supply - Sagem PHOTO EASY 260 User Manual

Liasse AZUR_GB.book Page 6 Lundi, 23. mai 2005 11:31 11
4 P Y
REPARE OUR
C
ONNECT THE MAINS SUPPLY
Remark: when installing your printer near a wall or some other object, keep an open space of at
least 4 inches at the back of the printer, to make sure the movement of the sheet of paper
being printed is not obstructed.
Please refer to the safety instructions at the beginning of this user guide
before making any connections.
Insert one end of the mains lead into the corresponding socket of the power
supply.
Connect the power supply prug to the printer, pushing it in fully as shown in
the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Press the On/Off button
The language selection screen appears when you switch the printer on for the
first time. Use the browser's
and press the
A welcome screen is displayed.
P P
HOTO RINTER
until the screen lights up.
or keys to select the language you want
key to confirm.
- 6 -