Transferring Photos By Infrared Link - Sagem PHOTO EASY 260 User Manual

Liasse azur GB.fm Page 13 Mardi, 24. mai 2005 11:45 11
T
RANSFERRING PHOTOS BY INFRARED LINK
Warning: if a memory card in inserted in the printer, you cannot access the infrared
transfer mode.
Warning:
if you have started transfer by Bluetooth, you will not be able to transfer photos by
infrared if you have not before hand erased the internal memory by holding the
key down for 3 seconds.
You can use the printer to print photos stored in a mobile phone, a PDA or a
PC. For this, you need to transfer the photos to the printer by means of the
infrared link.
Remark: for a list of compatible devices, go to www.sagem.com.
Switch on the printer. Position the infrared window of your peripheral device
facing the infrared window of the printer, at a distance of no more
than 30 centimetres.
Warning:
in an environment exposed to intense light, a distance of no more than 10
centimetres between the two infrared windows is recommended.
Select a photo on your device and launch its transfer via the infrared link.
When the transfer is complete, the following information is displayed on the
screen "Infrared transfer - Please wait".
- 13 -