Sagem PHOTO EASY 260 User Manual page 19

Liasse AZUR_GB.book Page 15 Lundi, 23. mai 2005 11:31 11
Ensure that all hardware units are powered. Never force installation of
connectors on hardware, as the cable and the connector could be damaged.
Remark: for a list of compatible devices, go to www.sagem.com.
Connect the Bluetooth adaptor (optional equipment) to the USB port (A)
of your photo printer.
Identification among hardware units is automatic.
Warning:
the size of the photo or photos to be transferred to the photo printer must be less
than 600 Kbytes. The photo format required is the JPEG format. An error message
Wireless memory full
"
is reached.
To transfer new data to the photo printer, you must clear the memory. To
do this, press and hold the
When the transfer is complete, the following information is displayed on the
screen "Bluetooth transfer - Please wait"
You can now:
• start printing the transferred photograph, after setting the print format
and number of copies if required,
• transfer another photograph, which will be added to those already stored
in the printer. At the end of each transfer, the total number of
photographs stored is displayed on the printer screen (the one with the
highest number being the last one transferred).
Remark: the following message is displayed if the photo printer memory is full "Wireless
memory full".
A
" will be displayed when the maximum storage capacity
key for 3 seconds.
- 15 -