Using A Dpof-Compatible Peripheral Device; Connecting A Digital Camera (Pictbridge Mode) - Sagem PHOTO EASY 260 User Manual

Liasse AZUR_GB.book Page 16 Lundi, 23. mai 2005 11:31 11
U DPOF-
SING A
This function allows you to select the photos that you want to print on your photo
printer from your digital camera in PictBridge mode or from your memory card.
Select the required photographs on the camera (follow the instructions in the
documentation of your camera).
Switch the printer on. Place the memory card into its slot. The following message
is displayed on the screen "Print the camera DPOF selection?".
Start printing by pressing the
To exit DPOF mode, press the
C
ONNECTING A DIGITAL CAMERA
Warning:
if a memory card is inserted in the printer, you cannot access PictBridge mode.
Your photo printer supports PictBridge standards, allowing you to print photos
directly from cameras that are PictBridge-compatible.
Refer to your camera's accompanying documentation.
From your camera, you can:
print a photo,
select them and print them severale times on the same paper,
print from a DPOF-standard file,
monitor printing and especially the beginning, progress and end of the
printing process. Also, error messages likely to occur (no paper, paper jam,
no ink, cover not closed, no cartridge, fatal error).
COMPATIBLE PERIPHERAL DEVICE
key.
key.
(
PICTBRIDGE MODE
- 16 -
)