Pc Card Questions And Answers - National Instruments DAQCard-1200 User Manual

PC Card Questions and Answers

Configuration
Operation
© National Instruments Corporation
This appendix contains a list of common questions and answers relating to
PC Card operation. The questions are grouped according to the type of
information requested. You may find this information useful if you are
having difficulty with the PC Card system software configuration.
1. Do I need to use my PC Card configuration utility to configure the
National Instruments PC Cards?
No. We recommend that you do not configure our PC Cards using
PC Card Control or an equivalent PC Card configuration utility. Use
the configuration utilities included with the NI-DAQ driver software to
properly configure your card. The appropriate utilities are
for Windows users or
2. What should I do if my computer does not have Card and Socket
Services version 2.0 or later?
Contact the manufacturer of your computer or of your PC Card adapter
and request the latest Card and Socket PC Card driver. Our NI-DAQ
software will work with any Card and Socket Service driver that is
compliant to version 2.0 or higher.
1. My PC Card works when inserted before power-on time, but it
does not work when hot inserted. What is wrong?
You may have an interrupt conflict. If you have a utility such as
, run it to determine the allocated interrupts, then refer to
MSD.EXE
question 5 in the Resources
Microsoft Windows.
for DOS users
DAQCONF
section.
MSD.EXE
D-1
D
WDAQCONF
is usually shipped with
DAQCard-1200 User Manual