Seat Assembly - Smooth Fitness SMB-XBIKE Owner's Manual

"A
I
SSEMBLY NSTRUCTIONS"
S –
TEP2

Seat Assembly

1. Attach the seat to the seat post. The seat
studs will insert through the seat post holes
2. Secure the seat to the seat post using
2×M8 flat washers (22) and 3x M8 Nylock
nuts (16).
3. Tighten all fasteners now
After the seat has been attached and the
fasteners are completely tightened.
1. Secure the back pad frame to the seat post
using 2x M8*50mm carriage bolts (10), 2x
M8 flat washers (22) and 2x M8 cap nut
(16).
2. Tighten all fasteners now
1. Attach the back pad to the back bad frame
and secure it, using 4x M8 spring washers
(19) and 4x M8*45mm bolts (18).
Tighten all fasteners now
2.
7
3x #22
3x #16
2x #10
2x #22
2x #16
4x #19
4x #18