Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation
Low sound
When "ANALOG" is selected with the INPUT button, set the ATT (LINE IN) switch on the
processor to "0dB."
If you connect the headphone jack of the AV device to either of the LINE IN (L/R) jacks of
the processor, raise the volume level on the connected AV device.
Raise the headphone volume.
The surround sound effect is not obtained.
Contents list
Top
>
Troubleshooting
94
Search
>
Possible causes of symptoms
>