Turning Off The Processor - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation

Turning off the processor

Power saving function of the processor
If you are not using the system for the time being or for a long time, you can reduce the
power consumption of the system, if necessary.
1. Press and hold the
(more than 3 seconds).
Contents list
Note
When the processor is turned off, the transmission of HDMI output signals also stops so
the HDMI Pass Through function
turned on automatically when you next turn on the headphones. You must turn on the
processor using the
Tip
When the processor and headphones are on, if no signal is input to the selected input
jack and no operation is attempted on the system for more than 20 minutes, the
processor turns off automatically.
Related topic
Using HDMI devices efficiently
Turning on the processor
Setting the processor to standby mode
Turning on the headphones
Top
/ (power) button down until the power indicator goes off
Goes off
[Details]
/ (power) button or the Control for HDMI function.
22
Search
> Getting Started > Turning the system on or off
is disabled. In this state, the processor is not
>