The Control For Hdmi Function ("Bravia" Sync) Does Notwork Properly - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation
The Control for HDMI function ("BRAVIA" Sync) does not
work properly.
Check the HDMI connection.
Set up the Control for HDMI function on the TV. For details, refer to the manual supplied
with your TV.
Make sure that the connected device is compatible with "BRAVIA" Sync.
Check the Control for HDMI settings on the connected device. For details, refer to the
manual supplied with the connected device.
Make sure that [Control for HDMI:] is set to [On] on the menu of the processor.
The Control for HDMI setting has not been changed even though you changed the
CONTROL FOR HDMI switch position.
Changing the CONTROL FOR HDMI switch position is not effected when the processor is
turned on. Set the processor to standby mode before you operate the CONTROL FOR
HDMI switch.
Contents list
When you are not using an AV amplifier with the processor
Set the processor to standby mode first, and then set the CONTROL FOR HDMI switch
to "MODE1."
When you connect an AV amplifier to the processor
Set the processor to standby mode first, and then set the CONTROL FOR HDMI switch
to "MODE2." In the Control for HDMI function, only one set of AV amplifier or equivalent
devices can be connected to a TV, etc. In the case of "MODE2," the Control for HDMI
function is limited.
See "Using HDMI devices
The processor turns off when you turn off the TV.
Top > Troubleshooting
efficiently" on "MODE1" and "MODE2."
105
Search
> Possible causes of symptoms >